Setting up and customizing your QLOCKTWO—the premium typographic clock that displays time in words—varies slightly depending on whether you own a desktop, wall, or wearable model. Initial Hardware Setup
Tabletop (Touch / Earth 13.5): Apply the self-adhesive protective strips to the bottom. Place the clock onto its magnetic stainless steel base. Plug the micro-USB cable into the back and connect it to power.
Wall Models (Classic / Large): Use the provided mounting template to mark and drill holes. Mount the wall bracket, guide the power cable through the built-in duct, and securely hang the clock using the lock pins. How to Set the Time
Smartphone App (Easiest): Download the free QLOCKTWO Flashsetter App for iOS or Android. Open the app, press “Flash”, and hold your phone’s screen against the light sensor on the back of the clock to sync the exact time instantly via light pulses.
Manual Adjustment: Use the physical buttons on the back. On Touch models, press the [] button first. Use [60] to advance hours, [5] to advance five-minute increments, and [1] to add single-minute corner dots. Press [] again to save. Customization Options
Interchangeable Covers: The front covers are magnetic. Carefully pull the cover off from a corner to swap it for a different color, material, or language matrix.
Language Synchronization: If you switch to a faceplate in a different language, press the illumination and [60] buttons simultaneously for 3 seconds. Press the illumination button repeatedly until your new language code appears, then press [60] to save.
Brightness Control: The clock natively uses an automatic light sensor. To set a fixed level, cycle through the 4 manual brightness stages by pressing the illumination icon button on the back.
“It Is” Toggle: By default, the words “It Is” only light up on top-of-the-hour and half-hour marks. Hold the [60] button for 3 seconds to keep “It Is” permanently illuminated. QLOCKTWO Touch Review
Leave a Reply